banner_page

74HCT174N,652

4.5V~5.5V 69MHz D-Type Flip Flop DUAL 74HCT174 8μA 74HCT Series 16-DIP (0.300, 7.62mm)


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-74HCT174N,652
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 541
  • Description: 4.5V~5.5V 69MHz D-Type Flip Flop DUAL 74HCT174 8μA 74HCT Series 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -40°C~125°C TA
Packaging Tube
Published 1998
Series 74HCT
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type D-Type
Terminal Finish NICKEL PALLADIUM GOLD
Subcategory FF/Latches
Packing Method BULK PACK
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74HCT174
Function Master Reset
Qualification Status Not Qualified
Output Type Non-Inverted
Number of Elements 1
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Clock Frequency 69MHz
Family HCT
Current - Quiescent (Iq) 8μA
Current - Output High, Low 4mA 5.2mA
Output Polarity TRUE
Max I(ol) 0.004 A
Number of Bits per Element 6
Max Propagation Delay @ V, Max CL 35ns @ 4.5V, 50pF
Trigger Type Positive Edge
Input Capacitance 3.5pF
Propagation Delay (tpd) 53 ns
fmax-Min 20 MHz
Max Frequency@Nom-Sup 20000000Hz
Height Seated (Max) 4.7mm
RoHS Status ROHS3 Compliant

74HCT174N,652 Overview


The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. T flip flop is configured with an output of Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Through Holeis occupied by this electronic component. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -40°C~125°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. It should not exceed 69MHzin its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 8μAof quiescent current. 16terminations have occurred. The object belongs to the 74HCT174 family. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3.5pF farads. The electronic device belongs to the HCTfamily. The RS flip flops belongs to FF/Latches base part number. It reaches the maximum supply voltage (Vsup) at 5.5V. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. In view of its reliability, this D flip flop is a good fit for BULK PACK. There are 5V power supplies attached to it.

74HCT174N,652 Features


Tube package
74HCT series
5V power supplies

74HCT174N,652 Applications


There are a lot of NXP USA Inc. 74HCT174N,652 Flip Flops applications.

  • Frequency Dividers
  • Single Down Count-Control Line
  • Reduced system switching noise
  • Computers
  • Cold spare funcion
  • Patented noise
  • Event Detectors
  • Digital electronics systems
  • Bus hold
  • Dynamic threshold performance

Write a review

Note: HTML is not translated!
    Bad           Good