74HCT174PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 69MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 6 |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT174PW,118 Overview
It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 74HCTseries of FPGAs. There should be no greater frequency than 69MHzon its output. The element count is 1 . As a result, it consumes 8μA quiescent current and is not affected by external forces. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74HCT174. A voltage of 5V is used to power it. Its input capacitance is 3.5pF farads. This D flip flop belongs to the family of HCT. Surface Mount mounts this electronic component. It is designed with 16 pins. It has a clock edge trigger type of Positive Edge. The flip flop is designed with 6bits. If high efficiency is desired, the supply voltage should be kept at 5V. Currently, there are 6 input lines present.
74HCT174PW,118 Features
Tape & Reel (TR) package
74HCT series
16 pins
6 Bits
74HCT174PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT174PW,118 Flip Flops applications.
- Consumer
- Test & Measurement
- Count Modes
- Circuit Design
- Memory
- Storage registers
- High Performance Logic for test systems
- Data transfer
- Clock pulse
- Load Control
