74HCT175D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Clock Frequency | 49MHz |
| Logic Function | D-Type |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT175D-Q100J Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. Differentialis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74HCT series. You should not exceed 49MHzin the output frequency of the device. A total of 1elements are present in it. It consumes 8μA of quiescent The object belongs to the 74HCT175 family. There is 3.5pF input capacitance for this T flip flop. A total of 16pins are provided on this board. If high efficiency is desired, the supply voltage should be kept at 5V. Operating temperatures should be lower than 125°C. If the operating temperature is higher than -40°C, the system should operate properly.
74HCT175D-Q100J Features
Tape & Reel (TR) package
74HCT series
16 pins
74HCT175D-Q100J Applications
There are a lot of Nexperia USA Inc. 74HCT175D-Q100J Flip Flops applications.
- Latch-up performance
- Event Detectors
- CMOS Process
- Power down protection
- Storage registers
- Asynchronous counter
- Shift registers
- Frequency Divider circuits
- QML qualified product
- EMI reduction circuitry
