74HCT175D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 4 |
| Clock Frequency | 49MHz |
| Propagation Delay | 16 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 19 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT175D,653 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. It should not exceed 49MHzin its output frequency. In total, there are 1 elements. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74HCT175. A voltage of 5V is used to power it. Input capacitance of this device is 3.5pF farads. A device of this type belongs to the family of HCT. It is mounted by the way of Surface Mount. This board is designed with 16pins on it. This device has the clock edge trigger type of Positive Edge. The design is based on 4bits. The supply voltage should be maintained at 5V for high efficiency. As of now, there are 4input lines. There is a consumption of 8μAof quiescent current from it.
74HCT175D,653 Features
Tape & Reel (TR) package
74HCT series
16 pins
4 Bits
74HCT175D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT175D,653 Flip Flops applications.
- Data transfer
- Data Synchronizers
- Storage Registers
- Memory
- Dynamic threshold performance
- ESCC
- Consumer
- Cold spare funcion
- Shift Registers
- Computing
