74HCT175N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Clock Frequency | 49MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 50 ns |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT175N,652 Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). The Tubepackage contains it. T flip flop is configured with an output of Differential. Positive Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. It is operating at -40°C~125°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74HCT series. You should not exceed 49MHzin the output frequency of the device. In total, it contains 1 elements. During its operation, it consumes 8μA quiescent energy. A total of 16 terminations have been made. You can search similar parts based on 74HCT175. The power supply voltage is 5V. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HCTcan be found here. The part you are looking for is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. This D flip flop is well suited for BULK PACK based on its reliable performance. The power supply is 5V.
74HCT175N,652 Features
Tube package
74HCT series
5V power supplies
74HCT175N,652 Applications
There are a lot of NXP USA Inc. 74HCT175N,652 Flip Flops applications.
- Frequency Dividers
- EMI reduction circuitry
- Frequency Divider circuits
- High Performance Logic for test systems
- Consumer
- Communications
- Set-reset capability
- Asynchronous counter
- 2 – Bit synchronous counter
- Test & Measurement
