74HCT175PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Voltage | 5V |
| Number of Bits | 4 |
| Clock Frequency | 49MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 19 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT175PW,118 Overview
16-TSSOP (0.173, 4.40mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Differentialas its output configuration. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. You should not exceed 49MHzin the output frequency of the device. The list contains 1 elements. As a result, it consumes 8μA quiescent current. Terminations are 16. D latch belongs to the 74HCT175 family. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 3.5pF farads. A device of this type belongs to the family of HCT. It is mounted in the way of Surface Mount. This board is designed with 16pins on it. This device has Positive Edgeas its clock edge trigger type. It is designed with 4bits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. As of now, there are 4input lines.
74HCT175PW,118 Features
Tape & Reel (TR) package
74HCT series
16 pins
4 Bits
74HCT175PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT175PW,118 Flip Flops applications.
- Bounce elimination switch
- Power down protection
- Balanced Propagation Delays
- Common Clocks
- Latch
- Cold spare funcion
- QML qualified product
- Counters
- Computers
- Test & Measurement
