74HCT193DB-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT193 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 65 ns |
| Count Rate | 43MHz |
| Timing | Synchronous |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT193DB-Q100J Overview
This device is packaged in a 16-SSOP (0.209, 5.30mm Width) package. This configuration uses 16terminations. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. A wire connects the 1elements. There are 16pins on all components. As a result, it is packaged in the way of a Tape & Reel (TR). It is mounted in the manner of [0]. The HCTfamily is derived from it. With its 74HCTseries designation, it can be used for a range of applications. The logic type of Binary Counter is adopted. The operating temperature should be set at -40°C~125°C. A mounting type of Surface Mountis adopted. Providing a voltage of 4.5V~5.5Vensures higher reliability of operation. It contains 4elements. You can find more related parts under its base part number of 74HCT193. To operate, it requires a supply voltage of [0]. Quiescent current is consumed at 8μA.
74HCT193DB-Q100J Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
4 bits per element
Operating supply voltage of 5V
74HCT193DB-Q100J Applications
There are a lot of Nexperia USA Inc. 74HCT193DB-Q100J Counters & Dividers applications.
- Frequency dividing circuits
- VHF, UHF, FM, AM, etc.
- Frequency division
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed or Programmable Frequency Division
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Timers
- Clocks
- Up Counters
- Frequency dividers
