74HCT193PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT193 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 43 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 87 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Sync/Async | Synchronous |
| Number of Input Lines | 4 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 43MHz |
| Timing | Synchronous |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT193PW,118 Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. There are 1 terminations on the device. Tape & Reel (TR)is used to package it. There are 16 pins going on to connect other parts in the circuit. It is mounted using the way of [0]. Due to its membership in the 74HCTseries, it is suitable for a variety of applications. A logic type of Binary Counter is adopted. It is recommended that the operating temperature be set to -40°C~125°C. There is a mounting type of Surface Mounton this device. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array consists of elements storing 4bits each. In the device, the information consists of 4 bits. Among its base part number [0], you will find additional parts that are related. The device requires a supply voltage of [0]. Electrical characteristics are stable at temperature 125°Cfor extended periods of time. It operates within a specified temperature range, with the lower limit typically set at -40°C degrees Celsius. It reaches 5.5Vvoltage at its maximum. The minimum voltage available for the device is as low as 4.5V. The current consumed is 8μA when there are no external factors. A total of 4lines are used for inputting binary data. The device has a total of 4 output lines. As a normal operating device, it has 1circuits.
74HCT193PW,118 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
74HCT193PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT193PW,118 Counters & Dividers applications.
- Divide-by-N counting
- Time Out Timer for Consumer-Application Industrial Controls
- SQUARE ROOT
- Time delay circuits
- Frequency dividers
- Up Counters
- Programmable decade counters
- Frequency dividing circuits
- Time-delay circuits
- MULTIPLICATION
