74HCT1G66GV,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 128Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT1G66 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 50mA |
| Power Dissipation | 250mW |
| Max Supply Current | 50mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 15 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 13 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 95Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 1.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 44ns |
| Switch-on Time-Max | 36ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT1G66GV,125 Overview
The electrical component comes in SC-74A, SOT-753 packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. In total, there are 5 terminations. High-quality output is provided by the electronic component's 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 5 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. 74HCT1G66 can be used to search for analog multiplexer variants. An switch multiplexer with 128Ohm internal resistance has a value of 128Ohm. Please refer to the datasheets for 5 pins functions. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. 4.5V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 20μA. Draining from a single voltage supply, this analog switch requires a voltage of 4.5V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 50mA. This electrical part is compatible with 5V operating voltages. The 1 inputs need to be operated in order to work.
74HCT1G66GV,125 Features
1 Channels
Switch Circuit: SPST - NO
20μA Supply Current
-3db Bandwidth: 200MHz
74HCT1G66GV,125 Applications
There are a lot of Nexperia USA Inc. 74HCT1G66GV,125 Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Cell phones
- Residential Gateways, Home Gateway/Router
- T1/E1 Terminals
- Microwave transmission systems
- Channelized and Unchannelized DS3 applications
- Industrial control systems
- Modems
- Precision test equipment
- DVD-R
