74HCT1G66GW-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 128Ohm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT1G66 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Throw Configuration | SPST |
| Supply Type | Single |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 95Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 1.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 44ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT1G66GW-Q100H Overview
Presented in 5-TSSOP, SC-70-5, SOT-353, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~125°C TA. In total, there are 5 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. There is an electrical component included in the 5 series. A SPST - NO switching circuit is used to build these analog multiplexers. A 1 circuit is present in this switch device. Try searching for 74HCT1G66 variants of the analog switch ic. As far as internal resistance is concerned, it has 128Ohm. The datasheets for the 5 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 10V. Analog switch ics with Single supply type are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 20μA. Draining from a single voltage supply, this analog switch requires a voltage of 4.5V~5.5V. The Automotive, AEC-Q100 series contains it.
74HCT1G66GW-Q100H Features
1 Channels
Switch Circuit: SPST - NO
20μA Supply Current
-3db Bandwidth: 200MHz
74HCT1G66GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74HCT1G66GW-Q100H Analog Switches & Multiplexers ICs applications.
- Medical systems
- DSUs
- HDTV
- Remote wireless modules
- E1 Network Equipment
- Public switching systems
- Microprocessor Controlled Analog Systems
- Digital access cross connects
- Automotive applications
- Digital Cross-Connects
