74HCT251D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100, 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Propagation Delay (tpd) | 53 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT251D-Q100J Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~125°C, turn signal switch will not be influenced by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the Automotive, AEC-Q100, 74HCT series, these multiplexers have a wide range of applications.There is a design for terminating 16 as part of its basic configuration.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.Currently, it is configured with 16 pins.Surface Mount is the way it is mounted.Among the family of HCT the logic switch is a member.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4.5V.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.As a result, the turn signal switch consists of 1 outputs.
74HCT251D-Q100J Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
74HCT251D-Q100J Applications
There are a lot of Nexperia USA Inc. 74HCT251D-Q100J Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- LVDS
- Data transfer
- To select different devices in microprocessor input
- Combinational circuit
- Metal detectors
- Memory chips
- Data bus control
- Medical industry
- CNC machines
