74HCT253N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Number of Inputs | 4 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 57 ns |
| Propagation Delay (tpd) | 60 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.7mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT253N,652 Overview
In order to conserve board space, digital switch is included in the 16-DIP (0.300, 7.62mm).Tube is the packaging method.The method digital switch ic adopts for mounting is Through Hole.The analog IC used in the multiplexers can be referred to as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~125°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers can be used for a wide range of applications since they are members of 74HCT series.It is designed with 16 terminations as part of its basic configuration.The part number for 74HCT253 can be used to find its logic switch related parts as well.In multiplexer's system, 5V is the voltage supplied.In this turn signal switch, there are 16 components that can be connected to each pin.I would like to refer to the logic switch as a member of the HCT family.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.In order to maintain mux switch's normal operation, power is provided to 5V.For the turn signal switch's operation, there are 1 outputs.In this multiplexer, there is a total of 4 inputs.
74HCT253N,652 Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Power supplies of 5V
74HCT253N,652 Applications
There are a lot of NXP USA Inc. 74HCT253N,652 Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Medium scale TV wall
- Metal detectors
- Memory system of computers
- Control unit of Central Processing unit (CPU)
- CPU memory location identification
- To select different devices in microprocessor input
- Data-routing applications
- Implementing boolean functions with multiple variables
- HDMI applications
