74HCT273BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 36MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT273BQ,115 Overview
The item is packaged in 20-VFQFN Exposed Padcases. It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. The operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74HCT series. Its output frequency should not exceed 36MHz Hz. A total of 1elements are present in it. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74HCT273. A voltage of 5V provides power to the D latch. There is 3.5pF input capacitance for this T flip flop. This D flip flop belongs to the family of HCT. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. A Positive Edgeclock edge trigger is used in this device. 8bits are used in its design. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is reported that there are 8 input lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.
74HCT273BQ,115 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
74HCT273BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HCT273BQ,115 Flip Flops applications.
- Data transfer
- Supports Live Insertion
- ESD protection
- Pattern generators
- Digital electronics systems
- Storage registers
- Differential Individual
- Clock pulse
- Load Control
- Parallel data storage
