74HCT273D,652
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 36MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 45 ns |
| fmax-Min | 20 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT273D,652 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. The Tubepackage contains it. T flip flop uses Non-Invertedas its output configuration. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~125°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74HCT series. Its output frequency should not exceed 36MHz Hz. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. Terminations are 20. If you search by 74HCT273, you will find similar parts. Power is supplied from a voltage of 5V volts. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HCT. Vsup reaches its maximum value at 5.5V. A normal operating voltage (Vsup) should remain above 4.5V.
74HCT273D,652 Features
Tube package
74HCT series
74HCT273D,652 Applications
There are a lot of Nexperia USA Inc. 74HCT273D,652 Flip Flops applications.
- Balanced Propagation Delays
- Frequency Dividers
- Computers
- Circuit Design
- Shift registers
- EMI reduction circuitry
- Safety Clamp
- Supports Live Insertion
- Parallel data storage
- Registers
