74HCT273DB,112
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 36MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
74HCT273DB,112 Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. Package Tubeembeds it. There is a Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74HCT series. A frequency of 36MHzshould not be exceeded by its output. The element count is 1 . It has been determined that there have been 20 terminations. JK flip flop belongs to 74HCT273 family. Power is provided by a 5V supply. There is 3.5pF input capacitance for this T flip flop. Devices in the HCTfamily are electronic devices. It is mounted in the way of Surface Mount. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. There are 8bits in its design. In order to ensure high efficiency, the supply voltage should remain at 5V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. 8μAquiescent current consumed.
74HCT273DB,112 Features
Tube package
74HCT series
20 pins
8 Bits
74HCT273DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT273DB,112 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Shift registers
- Cold spare funcion
- ESCC
- Data storage
- Control circuits
- EMI reduction circuitry
- Synchronous counter
- Clock pulse
- CMOS Process
