74HCT273PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Output Current | 25mA |
| Clock Frequency | 36MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 45 ns |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74HCT273PW,118 Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. The output it is configured with uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -40°C~125°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HCT series. A frequency of 36MHzshould not be exceeded by its output. In total, it contains 1 elements. It consumes 8μA of quiescent Currently, there are 20 terminations. It is a member of the 74HCT273 family. A voltage of 5V is used as the power supply for this D latch. This JK flip flop has a 3.5pFfarad input capacitance. Devices in the HCTfamily are electronic devices. This board has 20 pins. 5.5Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. This T flip flop features a maximum design flexibility due to its output current of 25mA.
74HCT273PW,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
74HCT273PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT273PW,118 Flip Flops applications.
- Shift Registers
- Asynchronous counter
- Shift registers
- Balanced Propagation Delays
- Latch
- Matched Rise and Fall
- Pattern generators
- ESCC
- Single Up Count-Control Line
- Guaranteed simultaneous switching noise level
