74HCT299D,653
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT299 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8-Bit |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | Universal Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 56 ns |
| fmax-Min | 17 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT299D,653 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. It is packaged in a way that resembles Tape & Reel (TR). A 8-Bit circuit achieves its superior flexibility by using 8-Bit components. A Universal Shift Register logic type is used in this electrical device. There is an electronic part that is mounted in a Surface Mount-shaped arrangement. A higher operating temperature than -40°C~125°C is recommended. Due to its high and low output current options, 6mA 6mA's maximum level of flexibility is achieved when it comes to designing its features. A 74HCT series FPGA is a type of FPGA that is part of the family of FPGAs. It operates with a supply voltage of 4.5V~5.5V. 74HCT299 family is its parent. There is one type of termination that is called the 20 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. For normal operation, the supply voltage must be kept above 5V in order for the device to function properly. There is a 20 pin count that is included in this device. The electronic part was designed using 8 Bits. The HCT family is made up of a number of electronic devices, one of which is this device, that belong to the genre of electronic devices. Upon reaching 5.5V, Vsup reaches its maximal value. A higher voltage supply (Vsup) should be used. A 5V power supply is used to operate it. It uses POSITIVE EDGE for its trigger. In addition to this, HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL is another characteristic of it. In Shift Registers, this part is included.
74HCT299D,653 Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
74HCT299 family
20 pin count
5V power supplies
74HCT299D,653 Applications
There are a lot of NXP USA Inc. 74HCT299D,653 Universal Bus Functions applications.
- Illumination
- Laptop
- Digital watch
- Digital camera
- Small and medium distributed photovoltaic power generation system
- Urban rail vehicle
- Agriculture and light complementary power station
- Automatic watering system
- Calculator
- Networking
