74HCT299N,652
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | Universal Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 56 ns |
| fmax-Min | 17 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT299 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8-Bit |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Family | HCT |
74HCT299N,652 Overview
The package 20-DIP (0.300, 7.62mm) contains this file embedded in it. It is packaged in the way of Tube. Flexible 8-Bit circuits are used to achieve its superior performance. Logic type Universal Shift Register is used on this electrical device. An electronic part such as this one is mounted in the way of the Through Hole-axis. The operating temperature should be higher than -40°C~125°C. It features maximum design flexibility thanks to its High/Low output current. A 74HCT series FPGA is a type of FPGA that is part of the family of FPGAs. 4.5V~5.5V is the supply voltage. 74HCT299 family is represented by it. The 20 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. It is important to keep the supply voltage above 5V for normal operation. There are 20 pins on it. In order to design this electronic part, 8 Bits have been used. The device belongs to the HCT family of electronic devices. When Vsup reaches 5.5V, the maximum supply voltage has been reached. The supply voltage (Vsup) should be greater than 4.5V. 5V power supplies are used to power the device. POSITIVE EDGE is the trigger configured with it. In addition to this, it is also characterized by HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. Shift Registers contains this part.
74HCT299N,652 Features
20-DIP (0.300, 7.62mm) package
74HCT series
74HCT299 family
20 pin count
5V power supplies
74HCT299N,652 Applications
There are a lot of NXP USA Inc. 74HCT299N,652 Universal Bus Functions applications.
- Flashlight
- Mobile caravan
- Square wave oscillators
- Overvoltage and undervoltage protection
- Digital stopwatches
- Electric grinding wheel
- Memory devices
- Photovoltaic grid-connected power system
- Embedded system
- Hair dryer
