Parameters |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2008 |
Series |
74HCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
HTS Code |
8542.39.00.01 |
Subcategory |
Shift Registers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HCT299 |
Pin Count |
20 |
JESD-30 Code |
R-PDSO-G20 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
8-Bit |
Load Capacitance |
50pF |
Number of Bits |
8 |
Family |
HCT |
Output Characteristics |
3-STATE |
Current - Output High, Low |
6mA 6mA |
Logic Type |
Universal Shift Register |
Output Polarity |
TRUE |
Trigger Type |
POSITIVE EDGE |
Propagation Delay (tpd) |
56 ns |
fmax-Min |
17 MHz |
Count Direction |
BIDIRECTIONAL |
Max Frequency@Nom-Sup |
20000000Hz |
Height Seated (Max) |
1.1mm |
Length |
6.5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
74HCT299PW,112 Overview
The package 20-TSSOP (0.173, 4.40mm Width) includes it. Tube is the way it is packaged. It achieves superior flexibility through 8-Bit circuits. The Logic type of this electrical device is Universal Shift Register. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. It is recommended that the operating temperature be higher than -40°C~125°C. It features maximum design flexibility thanks to its High/Low output current. This is a type of FPGA from the 74HCT series. The voltage at which it operates is 4.5V~5.5V. It is a member of the 74HCT299 family. It is possible to use 20 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. The supply voltage should be kept above 5V for normal operation. 20 pins are included. An electronic part designed with 8 Bits is used in this product. In the family of HCT devices, this electronic device belongs. Upon reaching 5.5V, the supply voltage (Vsup) reaches its maximum value. A higher voltage supply (Vsup) should be used. 5V power supplies are used to power the device. POSITIVE EDGE is the trigger it is configured with. Moreover, it is characterized by HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL as well. In Shift Registers, this part is included.
74HCT299PW,112 Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
74HCT299 family
20 pin count
5V power supplies
74HCT299PW,112 Applications
There are a lot of NXP USA Inc. 74HCT299PW,112 Universal Bus Functions applications.
- Mountain power station
- CD player
- Massager
- Alarm circuit using LDR
- Networking
- Memory devices
- Air conditioner
- Digital stopwatches
- Microprocessors
- General AND Logic Operation