Parameters |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
Series |
74HCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
HTS Code |
8542.39.00.01 |
Subcategory |
Shift Registers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HCT299 |
Pin Count |
20 |
JESD-30 Code |
R-PDSO-G20 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
8-Bit |
Load Capacitance |
50pF |
Number of Bits |
8 |
Family |
HCT |
Output Characteristics |
3-STATE |
Current - Output High, Low |
6mA 6mA |
Logic Type |
Universal Shift Register |
Output Polarity |
TRUE |
Trigger Type |
POSITIVE EDGE |
Propagation Delay (tpd) |
56 ns |
fmax-Min |
17 MHz |
Count Direction |
BIDIRECTIONAL |
Max Frequency@Nom-Sup |
20000000Hz |
Height Seated (Max) |
1.1mm |
Length |
6.5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
74HCT299PW,118 Overview
Embedded in the 20-TSSOP (0.173, 4.40mm Width) package, it is used by many applications. In this case, it is packaged in the same way as Tape & Reel (TR). A 8-Bit circuit is used for achieving its superior flexibility as a result of its use of 8-Bit circuits. As far as the logic type of this electrical device is concerned, it is Universal Shift Register. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. Over -40°C~125°C, the operating temperature should be higher. In addition, 6mA 6mA features the highest level of flexibility in its design due to its high and low output currents. It is a type of FPGA that belongs to the 74HCT series of FPGAs. Powered by 4.5V~5.5V, it operates on a voltage of V. 74HCT299 family is its parent. In 20 terminations, a transmission line is terminated with an impedance-matched device. Normal operation requires an output voltage above 5V. There is a 20 pin count that is included in this device. A 8-Bit electronic part was designed for this application. It is a HCT-family electronic device. There is a maximum voltage supply (Vsup) reached when 5.5V is reached. A higher voltage supply (Vsup) should be used. 5V power supplies are used to power the device. POSITIVE EDGE is the trigger configured with it. Furthermore, it has the characteristic of HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL as well. I have included this part in Shift Registers as well.
74HCT299PW,118 Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
74HCT299 family
20 pin count
5V power supplies
74HCT299PW,118 Applications
There are a lot of NXP USA Inc. 74HCT299PW,118 Universal Bus Functions applications.
- TTL (Transistor Transistor Logic) circuitry
- Test and Measurement
- Electronic Points of Sale
- Photovoltaic grid-connected power system
- In-vehicle system
- Tablets
- Circuits involving computation and processing
- DVD
- Microcontrollers
- Embedded system