74HCT2G66DC-Q100H

30ns, 44ns SPST - NO 95Ohm Analog Switches 74HCT2G66 8 Pins 1μA 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HCT2G66DC-Q100H
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 712
Description: 30ns, 44ns SPST - NO 95Ohm Analog Switches 74HCT2G66 8 Pins 1μA 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off))	3.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 44ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-60dB @ 1MHz
Voltage - Supply, Single (V+)	4.5V~5.5V
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	95Ohm
Max Power Dissipation	300mW
Base Part Number	74HCT2G66
Pin Count	8
Operating Supply Voltage	5V
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	40μA
Max Supply Current	20μA
Throw Configuration	SPST
Turn On Delay Time	36 ns
Supply Type	Single
Turn-Off Delay Time	53 ns
-3db Bandwidth	200MHz
On-State Resistance (Max)	95Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	1μA

74HCT2G66DC-Q100H Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. As part of its design, the 8 series is equipped with this electronic component. SPST - NO switching circuits are used in these analog switch ics. The multiplexer consists of 2 circuits. Use 74HCT2G66 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 95Ohm. To find out what the 8 pins do, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 4.5V. The analogue multiplexer could operate on 40μA current. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. Put voltage above 20μA on the multiplexer to cause damage. Operating voltages of 5V are compatible with the electrical part. The Automotive, AEC-Q100 series contains it.