74HCT2G66DC,125

30ns, 44ns SPST - NO 95Ohm DUAL Analog Switches 74HCT2G66 8 Pins 1μA 5V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HCT2G66DC,125
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 368
Description: 30ns, 44ns SPST - NO 95Ohm DUAL Analog Switches 74HCT2G66 8 Pins 1μA 5V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HCT2G66
Pin Count	8
JESD-30 Code	R-PDSO-G8
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.5V
Number of Channels	1
Number of Circuits	2
-3db Bandwidth	200MHz
On-State Resistance (Max)	95Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 44ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-60dB @ 1MHz
Switch-on Time-Max	36ns
Switch-off Time-Max	53ns
Voltage - Supply, Single (V+)	4.5V~5.5V
Height Seated (Max)	1mm
RoHS Status	ROHS3 Compliant

74HCT2G66DC,125 Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -40°C~125°C TA. In total, 8 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 8 pins. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Using the 74HCT2G66 search parameter, you can discover variants of the switch. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply.