74HCT2G86DC-Q100H
| Parameters | |
|---|---|
| Base Part Number | 74HCT2G86 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 19 ns |
| Quiescent Current | 1μA |
| Logic Function | OR, XOR |
| Number of Inputs | 2 |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | XOR (Exclusive OR) |
| Max Propagation Delay @ V, Max CL | 19ns @ 4.5V, 50pF |
| High Level Output Current | 4mA |
| Low Level Output Current | 4mA |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Current - Quiescent (Max) | 1μA |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-VSSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
74HCT2G86DC-Q100H Overview
Due to its 8-VFSOP (0.091, 2.30mm Width) packaging, the part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A XOR (Exclusive OR) logic principle is used to make it work. The part must have a voltage of 4.5V~5.5V in order to function properly. An extended operating temperature of -40°C~125°C degrees Celsius. There is a hole in Surface Mount for mounting the part. In both high and low states, output current is 4mA 4mA. The series 74HCT contains it. Try searching with 74HCT2G86 if you're looking for device variants. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. Datasheets for 8 pin functions are available upon request. 2 inputs are supported by the part. Parts that are quiescent have 1μA current flowing through them. The device consists of 2 circuits. 1μA is the maximum current in standby mode. There is a package called 8-VSSOP offered by suppliers. It is not advisable for the device to operate in environments where the temperature is higher than 125°C. It is estimated that the minimal operating temperature of the part is -40°C. In normalsituations, users should not supply voltages higher than 5.5V to the device. 4.5V is the lowest voltage that should be fed to the part.
74HCT2G86DC-Q100H Features
XOR (Exclusive OR) Logic Type
Operating Temperature: -40°C~125°C
Quiescent Current: 1μA
74HCT2G86DC-Q100H Applications
There are a lot of Nexperia USA Inc. 74HCT2G86DC-Q100H Gates and Inverters applications.
- Washing machine
- Induction cooker
- Solar street light
- MPPT function (maximum power point tracking)
- Game console
- Hair dryer
- VCD
- Photovoltaic system
- Overcurrent/Short circuit protection
- In-vehicle system
