74HCT2G86DP,125
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT2G86 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Family | HCT |
| Number of Inputs | 2 |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | XOR (Exclusive OR) |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 19ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 48 ns |
| Propagation Delay (tpd) | 48 ns |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Current - Quiescent (Max) | 1μA |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
74HCT2G86DP,125 Overview
Shipping overseas is convenient due to the part's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This logic works according to the XOR (Exclusive OR) principle. A voltage of 4.5V~5.5V is needed to ensure full function of the part. Around -40°C~125°C is the extended operating temperature. A Surface Mount mount is used for this part. High and low output current states are both 4mA 4mA. This is part of the 74HCT series. A total of 8 terminations have been recorded. The part has 2 functions that significantly boost the user experience. In HCT, this chip plays an important role. Use 74HCT2G86 when searching for device variants. It is injected into the part body with 8 pins. A 2 input is supported by the part. The logic device shown here is a typical Gates. Circuits number 2 make up this device. A 50pF load capacitance is present in the part. Devices require a minimum voltage of 4.5V. The supply voltage should not exceed 5.5V. There is a method TAPE AND REEL in it that is designed for the industry. According to the datasheet, the part requires 5V power supply. When the standby mode is activated, there is 1μA current flowing.
74HCT2G86DP,125 Features
XOR (Exclusive OR) Logic Type
Operating Temperature: -40°C~125°C
HCT Family
74HCT2G86DP,125 Applications
There are a lot of Nexperia USA Inc. 74HCT2G86DP,125 Gates and Inverters applications.
- Range hood
- Computer
- Flashlight
- Electric grinding wheel
- Small ground power station
- Island protection
- Grid adaptation function
- Remote monitoring
- MPPT function (maximum power point tracking)
- Scanner
