74HCT373D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 8μA |
| Output Current | 35mA |
| Number of Bits | 8 |
| Propagation Delay | 48 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop, Inverter, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Number of Gates | 6 |
| Number of Input Lines | 10 |
| Independent Circuits | 1 |
| Ambient Temperature Range High | 125°C |
| Height | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT373D,653 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V voltage supply is required for operation. There is a temperature of -40°C~125°C at which the system operates. An FPGA in this series belongs to the 74HCT family. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. 74HCT373 is its family. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. There is a device in this electronic family called HCT. The device has 20 pins. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. In the circuit, there are 10 input lines that are constituted by an electronic circuit. It features maximum flexibility in design due to 35mA output current. A high level of efficiency is achieved by maintaining the supply voltage at 5V. Without external influences, it consumes 8μA of quiescent current.
74HCT373D,653 Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
74HCT373D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT373D,653 Latches applications.
- Serial Output Register
- Watches
- High-speed logic
- Serial Output Data Queuing
- Timers
- TV Set-top Boxes
- Storage
- BCD counting
- Automatic test equipment
- Frequency
