74HCT373DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2001 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 14 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT373DB,112 Overview
In the package 20-SSOP (0.209, 5.30mm Width), it can be found. This package has the format of Tube. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 4.5V~5.5V. It operates at -40°C~125°C degrees Celsius. In the 74HCT series, this FPGA is located. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. As a member of the 74HCT373 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. This electronic device is categorized as a HCT electronic device. The 20 pins are designed into it. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. Electronic circuits are represented by 8 input lines. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consumes 8μA of quiescent current without being affected by external factors.
74HCT373DB,112 Features
20-SSOP (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
74HCT373DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT373DB,112 Latches applications.
- Parallel Input
- Automotive Cluster
- Buffer/Storage Registers
- Bus system register with enable parallel lines at bus side
- Frequency dividing
- OC-48 communication systems
- Communication systems
- Storage
- Up/down difference counting
- Address register
