74HCT373PW-Q100,11
| Parameters | |
|---|---|
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 48 ns |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100, 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Turn On Delay Time | 14 ns |
74HCT373PW-Q100,11 Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. There is -40°C~125°C operating temperature. An FPGA in this series belongs to the Automotive, AEC-Q100, 74HCT family. This electronic part is designed with 8 Bits. This device has 20 terminations. The family in which it belongs to is 74HCT373. With a supply voltage of 5V, it operates. 20 pins are available on it. It is a member of the HCT family of electronic devices. There are 20 pins on it. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. During this period, the maximum supply voltage (Vsup) reaches 5.5V. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V.
74HCT373PW-Q100,11 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
74HCT373PW-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HCT373PW-Q100,11 Latches applications.
- Control circuits
- Shift right with parallel loading
- Automotive Body Electronics
- BCD counting
- Automotive HEV/EV Powertrain
- Display driver
- Synchronous frequency dividers
- Stacked or Push-Down Registers
- Motor Drives
- Automotive ADAS
