74HCT373PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Voltage | 7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 35mA |
| Number of Bits | 8 |
| Propagation Delay | 48 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT373PW,118 Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). It is packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~125°C is used for operation. An FPGA of this type belongs to the 74HCT series. Electronic parts with 8 bits are designed for this application. The device consists of 20 terminations that are designed to be used in conjunction with it. The family 74HCT373 includes it. The supply voltage of the device is 5V. The device is equipped with 20 pins. This electronic device belongs to the family of HCT. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. An electronic circuit can be found on 8 input lines. Its output current of 35mA ensures maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. It consumes 8μA of quiescent current without being affected by outside factors.
74HCT373PW,118 Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
74HCT373PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT373PW,118 Latches applications.
- Buffer Storage
- Meter applications
- Shift left with parallel loading
- Pseudo-random code generators
- Counting
- A/D and D/A conversion
- Stacked or Push-Down Registers
- Watches
- Accumulator Registers
- Buffer register
