74HCT374D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 44MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT374D,653 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74HCT series. Its output frequency should not exceed 44MHz Hz. In total, there are 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HCT374family includes it. A voltage of 5V is used to power it. Input capacitance of this device is 3.5pF farads. The electronic device belongs to the HCTfamily. Basically, it is designed with a set of 20 pins. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V. A total of 2ports are embedded in the D flip flop.
74HCT374D,653 Features
Tape & Reel (TR) package
74HCT series
20 pins
74HCT374D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT374D,653 Flip Flops applications.
- Common Clocks
- CMOS Process
- Communications
- Data storage
- Guaranteed simultaneous switching noise level
- Shift registers
- Frequency Dividers
- Single Up Count-Control Line
- Frequency Divider circuits
- Dynamic threshold performance
