74HCT374DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 44MHz |
| Propagation Delay | 48 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 16 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT374DB,118 Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. It is contained within the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -40°C~125°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 44MHz. In total, there are 1 elements. This process consumes 4μA quiescents. There are 20 terminations,JK flip flop belongs to 74HCT374 family. A voltage of 5V provides power to the D latch. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HCTcan be found here. A part of the electronic system is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. Flip flops designed with 8bits are used in this part. The flip flop contains 2ports. Optimal efficiency requires a supply voltage of 5V. Currently, there are 8 input lines present. Despite external influences, it consumes 8μAof quiescent current.
74HCT374DB,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
74HCT374DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT374DB,118 Flip Flops applications.
- Latch-up performance
- Individual Asynchronous Resets
- Balanced 24 mA output drivers
- Modulo – n – counter
- Data storage
- Pattern generators
- EMI reduction circuitry
- ESD protection
- QML qualified product
- Single Up Count-Control Line
