74HCT374PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 44MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 16 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT374PW,118 Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. The operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 44MHz. The list contains 1 elements. There is a consumption of 4μAof quiescent energy. There are 20 terminations,Members of the 74HCT374family make up this object. A voltage of 5V provides power to the D latch. Input capacitance of this device is 3.5pF farads. In this case, the D flip flop belongs to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. It is designed with a number of bits of 8. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If high efficiency is desired, the supply voltage should be kept at 5V. Despite external influences, it consumes 8μAof quiescent current. It is of 8 channels.
74HCT374PW,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
74HCT374PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT374PW,118 Flip Flops applications.
- CMOS Process
- Test & Measurement
- Balanced Propagation Delays
- Data transfer
- Cold spare funcion
- ATE
- Counters
- Computers
- ESD protection
- Latch
