74HCT377PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 53MHz |
| Propagation Delay | 14 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT377PW,118 Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. T flip flop uses Non-Invertedas the output. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74HCT series. There should be no greater frequency than 53MHzon its output. A total of 1 elements are present. Terminations are 20. Members of the 74HCT377family make up this object. Power is provided by a 5V supply. Its input capacitance is 3.5pFfarads. This D flip flop belongs to the family of HCT. A part of the electronic system is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. There are 8bits in this flip flop. For high efficiency, the supply voltage should be set to 5V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. There is a consumption of 8μAof quiescent current from it. Furthermore, it has WITH HOLD MODEas a characteristic.
74HCT377PW,118 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
74HCT377PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT377PW,118 Flip Flops applications.
- Frequency Divider circuits
- Parallel data storage
- Functionally equivalent to the MC10/100EL29
- ATE
- Shift registers
- 2 – Bit synchronous counter
- CMOS Process
- Frequency division
- Modulo – n – counter
- Event Detectors
