74HCT393PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2001 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Load Capacitance | 50pF |
| Propagation Delay | 48 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 48 ns |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| fmax-Min | 18 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 107MHz |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT393PW,112 Overview
The device is packaged in the 14-TSSOP (0.173, 4.40mm Width)type. 14 terminations are used for its configuration. Having a supply voltage of 5V enables to operate in a fully flexible manner. There are wires connecting 2elements. In all, there are 14 pins on each component. As a result, it is packaged as Tube. In the circuit, 14pins are used to connect other components. The device is mounted in the direction of [0]. In this case, it appears as a member of the HCT family. Having been designed as a member of the 74HCTseries, it is well suited to a variety of applications. A logic type of Binary Counter is adopted. A temperature of -40°C~125°Cshould be set for the operating environment. Having a mounting type of [0], it is suitable for installation. By providing the supply voltage of [0], it is capable of operating more reliably. The array consists of elements storing 4bits each. It should be noted that there are more related parts under the 74HCT393base part number. For the device to operate, a voltage supply of 5Vis required. The current consumed is 8μA when there are no external factors.
74HCT393PW,112 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
74HCT393PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT393PW,112 Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Divide-by"N" counters/frequency synthesizers
- Frequency dividers
- SQUARE ROOT
- Counter control/timers
- Communications Digital Frequency Synthesizers;
- Clocks
- DIVISION
- Frequency dividing circuits
- TRUE RMS-TO-DC CONVERSION
