74HCT4016N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4016 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 95Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 16Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 44ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| RoHS Status | ROHS3 Compliant |
74HCT4016N,112 Overview
This electronic part is conveniently packaged in 14-DIP (0.300, 7.62mm), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~125°C TA extended. In total, 14 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. As part of its design, the 14 series is equipped with this electronic component. Unlike digital switches, these are based on SPST - NO switching circuits. 2 circuits are used in this analogue multiplexer. Try searching with 74HCT4016 if you're looking for variants. Theswitch device is a typical Multiplexer or Switches. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
74HCT4016N,112 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
74HCT4016N,112 Applications
There are a lot of NXP USA Inc. 74HCT4016N,112 Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- DVD-R
- Industrial
- FTTH
- Audio signal routing
- Communications systems
- HDTV
- MP3 players
- CSU
- Microprocessor controlled systems
