74HCT4017N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | Counters |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4017 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | HCT |
| Direction | Up |
| Logic Type | Counter, Decade |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 10 |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 75 ns |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Count Rate | 67MHz |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT4017N,652 Overview
This device is supplied in the 16-DIP (0.300, 7.62mm) package. There are 16 terminations used for its configuration. The supply voltage of 5V permits it to operate with full flexibility. The device contains 1terminations. The total number of component pins is 16. Packaging is based on Tube. In this case, it emerges as a member of the HCT family. Due to the fact that it is a member of the 74HCTseries, it has a wide range of applications. In this case, the logic type is set to [0]. -40°C~125°Cis the recommended operating temperature. This device is mounted in the Through Holeposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. There are 10 bits stored in each element of the array. More related parts are available under its base part number 74HCT4017. In this case, there is 5V voltage coming from the voltage source. Supply voltage (Vsup) can be as low as 4.5V. It is possible to provide a voltage up to 5.5V (Vsup). This electronic component is from the Counters family.
74HCT4017N,652 Features
Embedded in the 16-DIP (0.300, 7.62mm) package
10 bits per element
74HCT4017N,652 Applications
There are a lot of NXP USA Inc. 74HCT4017N,652 Counters & Dividers applications.
- TRUE RMS-TO-DC CONVERSION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Up Counters
- Binary counter/decoder
- Programmable binary and decade
- Time-delay circuits
- Fixed or Programmable Frequency Division
- Control counters
- MULTIPLICATION
- SQUARING
