74HCT4020N,652
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | HCT |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Propagation Delay (tpd) | 54 ns |
| Count Rate | 47MHz |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | Counters |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4020 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
74HCT4020N,652 Overview
A 16-DIP (0.300, 7.62mm)package is used for this device. The configuration of this device is based on 16terminations. This device is fully flexible due to the supply voltage of [0]. In this diagram, there are 1elements that are interconnected by wires. The total number of component pins is 16. It is packaged in a manner consistent with Tube. In this case, it appears as a member of the family [0]. The 74HCTseries offers a wide range of applications due to its versatility. Binary Counteris selected as the logic type. It is recommended to set the operating temperature to -40°C~125°C. There is a mounting type of Through Holeon this device. It is able to operate with higher reliability when the supply voltage of 4.5V~5.5V is provided. The array consists of elements storing 14bits each. You can find more related parts under its base part number of 74HCT4020. In this case, 5Vvoltage is generated by the voltage source. There is 4.5V minimum supply voltage (Vsup) for this device. Up to 5.5Vis the maximum supply voltage (Vsup). This part is from the family [0].
74HCT4020N,652 Features
Embedded in the 16-DIP (0.300, 7.62mm) package
14 bits per element
74HCT4020N,652 Applications
There are a lot of NXP USA Inc. 74HCT4020N,652 Counters & Dividers applications.
- DIVISION
- SQUARE ROOT
- Up Counters
- Divide-by"N" counters/frequency synthesizers
- Frequency dividers
- ALGEBRAIC COMPUTATION
- Communications Digital Frequency Synthesizers;
- Timing applications
- Counter control/timers
- Analog multiplexing and demultiplexing
