74HCT4051BQ-Q100,1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140Ohm |
| Base Part Number | 74HCT4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Time (Ton, Toff) (Max) | 39ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4051BQ-Q100,1 Overview
Due to its 16-VFQFN Exposed Pad packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. An electrical component like this is included in the 16 series. The multiplexer consists of 1 circuits. Try searching with 74HCT4051 if you're looking for variants. An switch multiplexer with 140Ohm internal resistance has a value of 140Ohm. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 4.5V. In order to operate this switch device, it would need a current of 16μA. There is no problem with using dual supply voltage, but it should not exceed 5V. When using dual power supplies, you should attach at least 1V. It can operate from 5V operating voltages. The 8 inputs need to be operated in order to work. This is electronic component of the Automotive, AEC-Q100 series.
74HCT4051BQ-Q100,1 Features
16μA Supply Current
-3db Bandwidth: 180MHz
74HCT4051BQ-Q100,1 Applications
There are a lot of Nexperia USA Inc. 74HCT4051BQ-Q100,1 Analog Switches & Multiplexers ICs applications.
- DSUs
- USB 1.1 signal switching circuits
- Cell phones
- Isolation
- Communications systems
- Microprocessor controlled systems
- Medical
- Sample-and-hold systems
- DSLAMs
- Imaging
