banner_page

74HCT4051BQ,115

39ns, 32ns 120Ohm QUAD Analog Switches 74HCT4051 16 Pins 400nA 5V 16-VFQFN Exposed Pad


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74HCT4051BQ,115
  • Package: 16-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 898
  • Description: 39ns, 32ns 120Ohm QUAD Analog Switches 74HCT4051 16 Pins 400nA 5V 16-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-VFQFN Exposed Pad
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2000
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 140Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 500mW
Technology CMOS
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74HCT4051
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 16μA
Power Dissipation 500mW
Propagation Delay 5 ns
Turn On Delay Time 55 ns
Logic Function Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±) 4.5V~5.5V ±1V~5V
Supply Type Dual, Single
Bandwidth 180MHz
Turn-Off Delay Time 45 ns
Max Dual Supply Voltage 5V
On-State Resistance (Max) 120Ohm
Min Dual Supply Voltage 1V
Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 50 dB
Current - Leakage (IS(off)) (Max) 400nA
Channel Capacitance (CS(off), CD(off)) 3.5pF
On-state Resistance Match-Nom 9Ohm
Switch Time (Ton, Toff) (Max) 39ns, 32ns
Channel-to-Channel Matching (ΔRon) 6 Ω
Length 3.5mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74HCT4051BQ,115 Overview


Shipping overseas is convenient with the electronic component packed in 16-VFQFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. 16 terminations have been made so far. A 8 channel electronic part produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Using the 74HCT4051 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 140Ohm. Please refer to the datasheets for 16 pins functions. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 4.5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 16μA current would be sufficient. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. A dual power supply should have at least 1V voltage attached. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. A voltage of 5V can be used to operate the electronic component. It is possible to transfer data over a 180MHz-bandwidth.

74HCT4051BQ,115 Features


8 Channels
16μA Supply Current
Bandwidth: 180MHz

74HCT4051BQ,115 Applications


There are a lot of Nexperia USA Inc. 74HCT4051BQ,115 Analog Switches & Multiplexers ICs applications.

  • Automotive applications
  • Fiber to the Home
  • Medical Instrumentation
  • DVD-R
  • Routers
  • Cable PC
  • Battery-powered systems
  • Audio/video switches
  • Frame Relay Equipment
  • Power routing

Write a review

Note: HTML is not translated!
    Bad           Good