74HCT4051D-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 39ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4051D-Q100,11 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature extended to -40°C~125°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 8 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. The circuits in this analogue multiplexer number 1. Try searching with 74HCT4051 if you're looking for variants. Analog switches have 140Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. The digital multiplexer has a low cost Dual, Single supply. 4.5V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 16μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. It is recommended that you attach at least 1V to your dual power supply. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. A voltage of 5V can be used to operate the electronic component. Among the inputs that can be operated are the 8 inputs. Automotive, AEC-Q100 is a series number.
74HCT4051D-Q100,11 Features
8 Channels
16μA Supply Current
-3db Bandwidth: 180MHz
74HCT4051D-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HCT4051D-Q100,11 Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Low-Voltage
- Audio signal routing
- Medical systems
- Communications systems
- PDH Multiplexers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Optical Applications
- Avionics and Military Systems
- FTTH
