74HCT4051D,118
| Parameters | |
|---|---|
| Base Part Number | 74HCT4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Output Current | 4mA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 55 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 45 ns |
| Max Dual Supply Voltage | 5V |
| Number of Gates | 1 |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 39ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Drain to Source Resistance | 80Ohm |
| Length | 9.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
74HCT4051D,118 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Operational temperature extended around -40°C~125°C TA. There are 16 terminations totally. A 8 channel electronic part produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. Using the 74HCT4051 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 140Ohm. The functions of 16 pins can be found in the datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 16μA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. When using dual power supplies, you should attach at least 1V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. 5V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 8 inputs. It is possible to transfer data over a 180MHz-bandwidth. Drain to Source resistance for this electronic component is 80Ohm.
74HCT4051D,118 Features
8 Channels
16μA Supply Current
Bandwidth: 180MHz
Drain-to-Source resistance: 80Ohm
74HCT4051D,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4051D,118 Analog Switches & Multiplexers ICs applications.
- Industrial
- Medical
- Fiber to the Home
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- 65 V DACs
- Channel Banks
- CSU
- Residential Gateways, Home Gateway/Router
- Battery Powered Instruments
- Audio and video routing
