74HCT4051DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 55 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 45 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 39ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4051DB,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~125°C TA. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. The multiplexer consists of 1 circuits. Using the 74HCT4051 search parameter, you can discover variants of the switch. An switch multiplexer with 140Ohm internal resistance has a value of 140Ohm. For functions related to 16 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 4.5V. For this multiplexer to operate, 16μA current would be sufficient. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. If you are using dual power supplies, you should attach at least 1V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. This electrical part is compatible with 5V operating voltages. A 180MHz-bandwidth can be used for data transfer.
74HCT4051DB,112 Features
8 Channels
16μA Supply Current
Bandwidth: 180MHz
74HCT4051DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4051DB,112 Analog Switches & Multiplexers ICs applications.
- RGB switches
- Avionics test equipment
- Sample-and-hold systems
- Public switching systems
- Automotive applications
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Precision data acquisition
- SONET/SDH ADM
- Low-Voltage
- Precision test equipment
