74HCT4051N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5GND/-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 39ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 83ns |
| Switch-off Time-Max | 68ns |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 4.2mm |
| RoHS Status | ROHS3 Compliant |
74HCT4051N,112 Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, you'll find this switch device. 8:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 16. By its 8 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. There are 16 pins injected into the electronic part body. The circuits in this analogue multiplexer number 1. Try searching with 74HCT4051 to find analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
74HCT4051N,112 Features
8 Channels
-3db Bandwidth: 180MHz
74HCT4051N,112 Applications
There are a lot of NXP USA Inc. 74HCT4051N,112 Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Communication systems
- FTTH
- Avionics test equipment
- Microprocessor controlled systems
- E1 Multiplexer
- Fault Tolerant Systems
- Transmit
- Communication systems
- ISDN NT1/TA
