74HCT4051PW-Q100,1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140Ohm |
| Base Part Number | 74HCT4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Time (Ton, Toff) (Max) | 39ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4051PW-Q100,1 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. There is an electrical component included in the 16 series. A total of 1 circuits make up this switch device. Try searching with 74HCT4051 to find analog multiplexer variants. In this multiplexer, the internal resistance is 140Ohm. For functions related to 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 4.5V. It would be sufficient to run this analogue multiplexer with 16μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. It is recommended that you attach at least 1V to your dual power supply. Operating voltages range from 5V. The electrical component supports 8 inputs. It belongs to the series Automotive, AEC-Q100.
74HCT4051PW-Q100,1 Features
16μA Supply Current
-3db Bandwidth: 180MHz
74HCT4051PW-Q100,1 Applications
There are a lot of Nexperia USA Inc. 74HCT4051PW-Q100,1 Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- High speed data transmission line cards
- HDTV
- E1 Multiplexer
- PBX interfaces
- Video signal routing
- Precision instrumentation
- Mechanical reed relay replacement
- 65 V DACs
- Routers
