74HCT4051PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 140Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 16μA |
| Power Dissipation | 500mW |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 55 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Turn-Off Delay Time | 45 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Time (Ton, Toff) (Max) | 39ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4051PW,112 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~125°C TA. A total of 16 terminations have been recorded. As a result of its 8 channels, this electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. There are 1 circuits in this multiplexer. Look for analog switch ic variants by searching with 74HCT4051. It has an internal resistance of 140Ohm. To find out what the 16 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 5.5V. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage the electrical component should receive. For this digital switch to work, 16μA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. When using dual power supplies, you should attach at least 1V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. 5V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 8 inputs. 180MHz-bandwidths can be used to transfer data between multiplexers.
74HCT4051PW,112 Features
8 Channels
16μA Supply Current
Bandwidth: 180MHz
74HCT4051PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4051PW,112 Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Industrial and process control systems
- ATM
- SDH
- Transmit
- Precision test equipment
- Remote Powered Equipment
- Digital cross connects (DSX-1)
- Medical systems
- Communication systems
