Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
180Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HCT4051 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
16μA |
Power Dissipation |
500mW |
Propagation Delay |
5 ns |
Turn On Delay Time |
55 ns |
Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
180MHz |
Turn-Off Delay Time |
45 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
120Ohm |
Min Dual Supply Voltage |
1V |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
400nA |
Channel Capacitance (CS(off), CD(off)) |
3.5pF |
On-state Resistance Match-Nom |
9Ohm |
Switch Time (Ton, Toff) (Max) |
39ns, 32ns |
Channel-to-Channel Matching (ΔRon) |
6 Ω |
Drain to Source Resistance |
180Ohm |
Length |
5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74HCT4051PW,118 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -40°C~125°C TA. A total of 16 terminations have been recorded. Due to its 8 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 16 pins. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HCT4051. There is 180Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Dual, Single power at a cost-effective price. There should be 4.5V voltage fed to the electrical part below 4.5V. This multiplexer would work with 16μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. This electrical part is compatible with 5V operating voltages. The 8 inputs need to be operated in order to work. 180MHz bandwidths enable data to be transferred. It has a Drain to Source resistance of 180Ohm ohms.
74HCT4051PW,118 Features
8 Channels
16μA Supply Current
Bandwidth: 180MHz
Drain-to-Source resistance: 180Ohm
74HCT4051PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT4051PW,118 Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Access Concentrators
- PDAs
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Precision instrumentation
- Wireless Local Loop
- Communication systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- E1 Network Equipment
- PCMCIA cards