74HCT4052BQ-Q100,1

60ns, 48ns SP4T 150Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 2μA 5V 16-VFQFN Exposed Pad

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HCT4052BQ-Q100,1
Package: 16-VFQFN Exposed Pad
Datasheet: PDF
Stock: 963
Description: 60ns, 48ns SP4T 150Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 2μA 5V 16-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	210Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	QUAD
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	74HCT4052
Output	COMMON OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Propagation Delay	18 ns
Turn On Delay Time	105 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 48ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height Seated (Max)	1mm
Length	3.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

74HCT4052BQ-Q100,1 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-VFQFN Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. There are 16 pins injected into the electronic part body. Circuits based on SP4T switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 2. Use 74HCT4052 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 210Ohm. For functions related to 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analog switch ics with Dual, Single supply type are cost-effective. 4.5V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 320μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. COMMON OUTPUT outputs are utilized by this digital multiplexer. Operating voltages of 5V are compatible with the electrical part. A 180MHz-bandwidth can be used for data transfer. The Automotive, AEC-Q100 series contains it.