74HCT4052D-Q100,11

60ns, 48ns SP4T 150Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 2μA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HCT4052D-Q100,11
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 514
Description: 60ns, 48ns SP4T 150Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 2μA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Supply Voltage	5V
Base Part Number	74HCT4052
Output	COMMON OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Propagation Delay	18 ns
Turn On Delay Time	105 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 48ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	210Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	2

74HCT4052D-Q100,11 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Around -40°C~125°C TA is the extended operating temperature. In total, 16 terminations have occurred. A 8 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 16 series. Unlike digital switches, these are based on SP4T switching circuits. The circuits in this analogue multiplexer number 2. Using the 74HCT4052 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 210Ohm. Please refer to the datasheets for 16 pins functions. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 4.5V as the lowest voltage for the electrical part. 320μA current would be enough for this multiplexer to operate. Despite this switch's dual supply capability, its voltage should not exceed 5V. With dual power supplies, you should attach at least 1V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. This analog switch ic utilizes COMMON OUTPUT output. Operating voltages of 5V are compatible with the electrical part. The transfer of data can be performed over 180MHz bandwidths. The Automotive, AEC-Q100 series contains it.