74HCT4052D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4052 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 60ns, 48ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 57ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
74HCT4052D,112 Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. A 4.5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. A SP4T switching circuit is used to build these analog multiplexers. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74HCT4052. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.
74HCT4052D,112 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 180MHz
74HCT4052D,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4052D,112 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Audio signal routing
- Power routing
- Sample-and-hold systems
- Wireless Local Loop
- Communication systems
- Video switching
- Access Concentrators
- RGB switches
- Avionics test equipment
