74HCT4052D,118

60ns, 48ns SP4T 150Ohm Analog Switches 74HCT4052 16 Pins 2μA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HCT4052D,118
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 170
Description: 60ns, 48ns SP4T 150Ohm Analog Switches 74HCT4052 16 Pins 2μA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
Resistance	210Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HCT4052
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Output Current	4mA
Propagation Delay	18 ns
Turn On Delay Time	41 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	8
Max Input Voltage	5V
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Rise Time	400ns
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	26 ns
Max Dual Supply Voltage	5V
Number of Gates	2
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 48ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switch-off Time-Max	57ns
Drain to Source Resistance	270Ohm
Height Seated (Max)	1.75mm
Length	9.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74HCT4052D,118 Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~125°C TA is the extended operating temperature. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. Into the electrical component body are injected 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. 74HCT4052 can be used to search for analog multiplexer variants. A 210Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The switch device would be able to operate with 320μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The electrical part can be operated at 5V voltage levels. The electrical component supports 8 inputs. There are 180MHz bandwidths for data transfer. The Drain to Source resistance of this electronic component is 270Ohm.