74HCT4052DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 210Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4052 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 320μA |
| Power Dissipation | 500mW |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 105 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 75 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 150Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 2.5V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Number of Input Lines | 13 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 60ns, 48ns |
| Number of Output Lines | 10 |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 57ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT4052DB,112 Overview
Due to its 16-SSOP (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. The multiplexer is located in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 8 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Use 74HCT4052 to search for variants of the digital switches. It has an internal resistance of 210Ohm. The functions of 16 pins can be found in the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. An effective Dual, Single supply digital multiplexer. 4.5V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 320μA would be sufficient for this switch device. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The electrical part can be operated at 5V voltage levels. A 180MHz-bandwidth can be used for data transfer.
74HCT4052DB,112 Features
8 Channels
Switch Circuit: SP4T
320μA Supply Current
Bandwidth: 180MHz
74HCT4052DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4052DB,112 Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Digital Cross-Connects
- Mechanical reed relay replacement
- Modems
- PDAs
- Industrial
- Avionics
- Video signal routing
- Central office
- Switching Systems
